1-10m RGBWithRGBWW 4-in-1 Colour Changing LED Light Strip 24V505060 LED/M

  

Over 10 Years of Bringing You Thousands of Quality Items at the Best Prices Around! We Must Be Doing Something Right! 1-10m RGBW/RGBWW 4-in-1 Colour Changing LED Light Strip 24V505060 LED/M. 4-in-1 LED Strips 24V only.

SmartlightT 4-in-1 60LED/M Strip Lights (SMD 5050) STRIP ONLY - NO CONTROLLER OR POWER SUPPLY. CE & RoHS 4-in-1 LED's have all four, RGB and White, elements in one LED so more colour combinations are possible and the brightness is higher as each LED can produce white as well as a colour instead of alternating ones. High quality LED strip lights for indoor or outdoor use. Ideal for creating accented lighting in the house or any commercial space, or in the car. The uses really are unlimited, everything from kitchen cabinets to ceilings to display cabinets to arts & crafts.

The LED's are superbright and are spaced at a pitch of 60 LED's per meter. Should you find 10m is too long for your use, the strip can be trimmed every 3 LED's (cutting guides are visible on the strips). Please note the 12v 10m lengths will have a voltage drop if wired as a single strip and are generally meant to be cut down, 24v 10m strips can be powered from one end with no voltage drop.

IP20 and IP65 LED strips also have a self adhesive backing tape already applied. Just peel and attach to any dry/dust free surface.

The stickiness, just like any tape, will depend on the material and location you use it. If you are using it on metals/plastics/woods the stickiness will be less as well as if there is any adverse pressure on it. If you need secure fitting we advise using either clamps or silicon adhesive for a permanent fitting. The self-adhesive fixing is meant for light use only or for temporary positioning.

IP67 and IP68 led strips are not self-adhesive. These are silicone tube enclosed and are meant to be used in excessively wet or underwater areas, and teh adhesive would fail. It is recommended these are fixed either with LED strip clamps or a waterproof sealant such as bathroom silicone. The LED's can be wired directly in to any 24V source through the remote receiver (the lights cannot operate without a remote/receiver unit).

The Remote/Receiver units and AC Adaptors are available as an optional extra (see Additional Accessories option in dropdown). (Excludes Weekends & Bank Holidays).